Telecommunications Cable Assemblies
High-performance cable assemblies for telecom infrastructure, 5G base stations, network equipment, data centers, and fiber optic systems.
- 5G & fiber optic ready
- Low latency, high bandwidth
- Impedance controlled (50Ω/75Ω)
- Outdoor rated IP67/IP68
Telecommunications Applications
Precision cable assemblies for modern telecom infrastructure
5G Base Stations
RRU, BBU, antenna feeders, fronthaul/backhaul connections
- Massive MIMO antennas
- Remote radio units
- Base band units
- Fiber optic fronthaul
Data Centers
High-density cabling, rack interconnects, structured wiring
- DAC/AOC cables
- MPO/MTP fiber
- Cat6a patch cables
- Server interconnects
Network Equipment
Switches, routers, optical transport, aggregation
- Core routers
- Edge switches
- DWDM systems
- Optical transport
RF & Microwave
Precision RF assemblies, low-loss coaxial cables
- SMA assemblies
- N-type connectors
- Low PIM cables
- Phase-matched sets
Wireless Systems
Wi-Fi access points, small cells, DAS systems
- Outdoor access points
- In-building DAS
- Small cell backhaul
- Antenna systems
Fiber Optic
Single-mode, multi-mode, MPO/MTP trunk cables
- LC/SC connectors
- MPO/MTP trunks
- OTDR tested
- Pre-terminated fiber
Technical Capabilities
Engineered for high-performance telecom applications
Signal Performance
- Impedance controlled 50Ω & 75Ω cables
- Low insertion loss & return loss
- VSWR < 1.5:1 for RF assemblies
- Phase-matched cable sets available
- Low latency for data center applications
- High-speed support: 10G to 400G
- Minimal crosstalk & EMI interference
- TDR and network analyzer tested
Materials & Construction
- Low-loss dielectric materials
- Precision connectors (SMA, N, LC, SC, MPO)
- Outdoor rated UV & weather resistant
- IP67/IP68 waterproof options
- Armored fiber for harsh environments
- Plenum (CMP) & riser (CMR) rated
- Bend-insensitive fiber (G.657)
- Cat5e, Cat6, Cat6a, Cat7 copper
A real industrial brief we delivered against
- •100kpcs/year per product (200kpcs total annual volume)
- •PTC model: EPCOS B59100A1080-A40
- •PTC lead time: 12-14 weeks
- •Connectors evaluated: STOCKO vs. Lumberg
Customer details have been anonymised; the technical particulars and numbers are reported as delivered.
Frequently Asked Questions
Common questions about telecom cable assemblies
Do you manufacture cables for 5G base stations and cell towers?
Yes, we manufacture high-performance cables for 5G infrastructure including antenna feeders, RRU connections, BBU cables, and fiber optic assemblies. Our cables meet stringent telecom standards for signal integrity and reliability.
Can you provide low-latency cables for data center applications?
Absolutely. We offer high-speed data center cables including DAC (Direct Attach Copper), AOC (Active Optical Cables), and structured cabling solutions optimized for minimal signal loss and low latency in high-density environments.
What network speeds do your cables support?
Our cables support a wide range of network speeds from 1Gbps to 400Gbps, including 10G, 25G, 40G, 100G Ethernet. We manufacture Cat5e, Cat6, Cat6a, Cat7, and fiber optic cables for various telecom applications.
Do you offer outdoor-rated telecom cables?
Yes, we provide outdoor-rated cables with UV resistance, water resistance (IP67/IP68), temperature extremes (-40°C to +85°C), and protection against environmental factors for outdoor telecom equipment and infrastructure.
Can you manufacture RF and microwave cable assemblies?
Yes, we manufacture precision RF and microwave cable assemblies with various connector types (SMA, N-type, BNC, TNC) and controlled impedance (50Ω, 75Ω) for frequencies up to 40GHz.
What testing do you perform on telecom cables?
We perform comprehensive testing including VSWR, insertion loss, return loss, impedance testing, TDR analysis, and network analyzer measurements to ensure signal integrity and performance meet telecom specifications.
Cost Optimization & Supply Chain Solutions
Beyond manufacturing - strategic support to reduce costs and ensure supply continuity
Long-Term Cost Reduction
Strategic component optimization for sustainable savings
Alternative Component Sourcing
Our sales managers can recommend cost-effective alternative models from Chinese suppliers that meet the same specifications - often reducing component costs significantly.
Custom Mold Development
For high-volume requirements, we can develop custom molds tailored to your exact needs. While there's an upfront investment, this dramatically reduces per-unit costs for long-term production runs.
Inventory Management Services
Never miss a deadline with our stocking solutions
Pre-Stocking for Critical Orders
If you have strict delivery requirements or seasonal demand peaks, we recommend pre-stocking key assemblies. Our extensive factory space can accommodate your inventory needs.
Material Management Support
For your most important orders, we provide comprehensive material management - ensuring components are ready when production begins, eliminating supply chain delays.
Speak with Our Melbourne Manager
Discuss cost optimization, inventory solutions, and custom component sourcing with Mark, our local Australia manager based in Melbourne.
Related Resources
Related Articles
Explore Other Industries
Connect the World with Precision
High-speed signal integrity, low latency, telecom-grade reliability
Melbourne Office: 1/30 Seaford Road, Seaford VIC 3198 | Mon-Fri 9AM-6PM