OURPCB Logo

Capabilities · Connector cross-reference

Connector Alternatives & Cross-Reference for Wire Harnesses

Send the TE, DEUTSCH, Amphenol, Molex or JST part numbers on your drawing. We check manufacturer-listed comparable parts, show you the options with their sources, and build the tested harness to the BOM you approve.

Updated · Harnesses built by Hebei Cloom (IATF 16949 certified factory)

Wire harness assembly line

TL;DR

  • We build cable assemblies and wire harnesses with connectors from your BOM, including TE, DEUTSCH, Amphenol, Molex and JST. JST is built on request; other brands are confirmed per enquiry.
  • If you need a second source or a shorter lead time, we check whether the manufacturer itself lists a comparable part, for example Amphenol ATM04-2P for DEUTSCH DTM04-2P.
  • A cross-reference is a starting point, not an approval. You approve any change in writing, and a sample (usually 1–3 pcs) is checked against your pass criteria before production.
  • We do not sell loose connectors. No MOQ; connector minimum buys are confirmed in the quote.

What the cross-reference service covers

This is a harness service, not a parts catalogue. You send the OEM connector part numbers from your drawing or BOM. We identify every part in the connector system (housing, terminals, seals, wedges or secondary locks), check whether the original manufacturer or the alternate manufacturer publishes a comparable part, and return the options with the source of each claim.

Typical reasons buyers ask: the specified connector has a long lead time, the BOM relies on a single source, procurement wants an approved second source on the BOM, or a price review. If the original part is end-of-life or discontinued (even if you still have its part number), or only a legacy sample is left, that is a different job, which we handle as obsolete connector replacement.

Once you approve a part, we update the BOM and drawing under revision control, build a sample, and then build and test the cable assembly or wire harness in production.

Connector brands we build harnesses with

Connectors are specified by your BOM. The brands below are ones we already build cable assemblies and harnesses with. Families listed are examples, not a complete range, and brand use for a specific build is confirmed per enquiry.

Connector brands built into harnesses to customer BOM
BrandExample familiesHow we handle it
TE Connectivity (incl. AMP)Per your BOM; DEUTSCH DT, DTM, DTP and HD10 are TE product linesBuilt to the TE part number on your BOM; availability and brand use confirmed per enquiry
DEUTSCH (TE)DT, DTM, DTP sealed heavy-duty connectorsBuilt to your BOM; confirmed per enquiry
Amphenol (incl. Amphenol Sine Systems)Per your BOM; AT, ATM, ATP and AHD are the Amphenol series in the comparable-parts table belowBuilt to your BOM; confirmed per enquiry
MolexMini-Fit Jr., Micro-Fit 3.0, Nano-Fit, KK, MX150, Pico-Clasp, SPOXMolex parts are bought from authorised distributors; confirmed per enquiry
JSTXH, PH, SM, VH, ZH, SH, PA and JWPF style familiesBuilt on request (stated as general practice by our sales team)

What our sales records show

Our harness sales knowledge base is built from 17,224 filtered customer enquiry and sales reply pairs from 1,566 customer contacts (counted as distinct company email domains or individual addresses), covering November 2018 to 14 September 2026 (counted 12 November 2026; same Hebei Cloom harness team). Summarised from the sales team's replies, the stated general practice is: the wire brand and type on the drawing is followed strictly; JST connectors are built on request; whether another connector brand can be used is confirmed per enquiry. One-off cases and prices are left out. That is why this page asks for full manufacturer part numbers rather than a brand name alone.

Manufacturer-stated comparable parts

In these rows the alternate manufacturer itself states the comparison: one series-level statement and three part-number statements. They are manufacturer claims that we have read, not results of our own mating tests, so every row is a starting point for review, not an approval for your application.

Connector cross-reference pairs with manufacturer source and status
Part on drawingAlternative reviewedBasis (source)Status
TE DEUTSCH DT seriesAmphenol AT seriesAmphenol Sine Systems "AT vs DT" brochure (updated 08-2025): AT Series developed to be compatible with existing industry-standard productsCandidate; qualify the exact housing, contact and seal parts
TE DEUTSCH DTM04-2PAmphenol ATM04-2PAmphenol Sine Systems ATM04-2P product page: "Comparable to PN# DTM04-2P"Candidate; qualify the exact parts
TE DEUTSCH DTP04-2PAmphenol ATP04-2PAmphenol Sine Systems ATP04-2P product page: "Comparable to PN# DTP04-2P"Candidate; qualify the exact parts
TE DEUTSCH HD10-6-12PAmphenol AHD10-6-12P-LAmphenol Sine Systems AHD10-6-12P-L product page: "Comparable to PN# HD10-6-12P"Candidate; qualify the exact parts

Data as of 19 November 2026: compiled for this page from the Amphenol Sine Systems product pages and brochure named in the sources list, checked on amphenol-sine.com on 19 November 2026. DEUTSCH is a TE Connectivity brand. Manufacturer statements can change; the current documents are re-checked when you send an enquiry.

Brand swaps that need a redesign

These are example design comparisons between popular families. No manufacturer statement makes them equivalents: they are compared from published specifications only. A matching or similar pitch does not make two connectors mate, so these are handled as a drawing change on both sides of the interface, not as a drop-in substitute.

Connector family design comparisons, not equivalents
Part on drawingFamily comparedBasis (source)Status
Molex PicoBlade (1.25 mm)JST GH (1.25 mm)Molex and JST product documents: same nominal pitch, different contact and retention systemsCompatibility not established; treat as a redesign
Molex KK 254 (2.54 mm)JST XH (2.50 mm)Molex and JST product documents: different pitchNot a drop-in mate; redesign required
Molex Micro-Fit 3.0 (3.00 mm)JST VH (3.96 mm)Molex and JST product documents: different pitchNot a drop-in mate; redesign required
Molex KK 254 (2.54 mm)TE AMPMODU IV/V 280513 (2.54 mm, two-row, 18-position)TE 280513 product page lists a 2.54 mm, two-row, 18-position housing; compared with KK 254 only as a design alternativeRedesign candidate only; compare the exact housings and mating headers

Data as of 9 November 2026: specifications from the Molex, JST and TE product pages named in the sources list. The status column is our engineering judgement from those specifications, not a manufacturer statement.

When a substitute is allowed and what must match

Permission and qualification limits

The first question is permission, not part numbers. If your drawing or customer specification names one manufacturer only, any alternate needs written approval from whoever holds design authority. Where a qualified product, a type approval or an end customer's approved parts list depends on the original part, a substitute may not be allowed at all, or only after that qualification is repeated. We ask before reviewing options.

Form, fit and function checks

Where a substitute is allowed, these points are checked:

  • Mating interface: the new connector must mate with the part already fitted to your equipment, or both ends change together.
  • Position count, pitch, row layout, keying and polarisation.
  • Contact system: terminal part number, plating, wire gauge range and the insulation diameter the seal accepts.
  • Current and voltage rating for each circuit, not only the family headline figure.
  • Environmental sealing, temperature range and vibration requirement for the application.
  • Latch and lock style, panel cut-out or mounting flange, and backshell or strain relief.
  • Crimp tooling: the alternate terminal needs its own applicator or hand tool and crimp specification.
  • Pin-by-pin mapping: cavity numbering and polarity of the alternate checked against the original pinout, not assumed from the family name.
  • Approval: who holds design authority. If the drawing names one manufacturer only, a substitute needs written approval.

Changing one half or both halves of the pair

Mixing manufacturers inside one mated pair, for example one brand of plug with another brand of receptacle, is only considered where the manufacturer documents the compatibility, and it is checked on the sample against the real mating part. If you control both ends, changing the whole pair to one manufacturer is usually the cleaner change.

Second source as an approved BOM option

For supply security, an alternate can be approved as a second source next to the original part rather than as a replacement. The BOM then lists both approved part numbers under revision control, and either can be built once the design owner has approved it on a tested sample.

How the review and build work

1. Part number review

We read the OEM part numbers on your drawing or BOM, identify housing, terminal, seal and accessory parts, and check whether the manufacturer itself lists a comparable part.

2. Candidate list with sources and open checks

You receive the original part and any candidate alternative side by side, with the source of each claim and the points that still need qualification. Nothing changes without your approval.

3. Revised BOM and drawing

If you approve an alternate, the BOM, wire list and drawing are updated under revision control so production and repeat orders use the same parts.

4. Sample build

We build a sample harness (usually 1–3 pcs) to the approved drawing and BOM. You mate it with the real equipment-side connector, or we use a controlled fixture you approve, and check it against the pass criteria you set.

5. Sign-off, production and test

Production starts only after you sign off the sample and the revised BOM and drawing are released. Builds follow IPC/WHMA-A-620; we generally run visual inspection, a pull test and a continuity test, and the acceptance class, test coverage and any extra tests are agreed per project before production.

What to send with your request

  1. Drawing, wire list or BOM with the full manufacturer part numbers (housing, terminals, seals, wedges or TPAs).
  2. Part number of the mating connector already fitted to your equipment, or a photo of it.
  3. Whether the drawing allows equivalents, or whether one manufacturer is mandatory.
  4. Why you need an alternative: lead time, price, single source, or a second approved source.
  5. Operating environment: sealing, temperature, vibration and any industry standard the harness must meet.
  6. Quantity per release, expected annual volume and target delivery date.

A brand name alone ("a TE connector") is not enough to quote. The full part number of each housing and terminal is what lets us check manufacturer cross-references and minimum buys.

Lead time, MOQ and samples

ItemWhat applies
MOQNo MOQ for prototypes or production. Connector and wire minimum buys can affect quantity and price and are confirmed in your quote.
Lead timeSample and production lead times depend on complexity and are confirmed in your quote.
QuotationFirst reply within 12 hours; quotation normally within 24 hours of a complete RFQ with all part numbers.
SampleUsually 1–3 pcs, built to the same drawing and BOM as production, for your approval.
Alternate reviewTime depends on the parts involved and is confirmed in your quote.

Quality system and inspection

Harnesses are built by Hebei Cloom. Its certificates cover different sites: IATF 16949:2016 (certificate IATF 0611191, NQA T198433, valid to 8 August 2029; scope wire harness production, product design excluded) and ISO 13485:2016 cover the No. 6 Fenglan Street site; ISO 9001:2015 covers the No. 99 Yuyuan Road site, both in Luquan, Shijiazhuang. If your programme needs automotive or medical QMS coverage, tell us and the quote names the producing site. Certificate copies are sent on request.

We provide engineering assistance with connector selection; final design approval of any alternate stays with you. Production and inspection follow IPC/WHMA-A-620; we generally run visual inspection, pull testing and continuity testing, and the acceptance class and any extra tests are agreed per project before production.

Connector alternatives FAQ

Can you build my harness with an alternative to the TE connector on my drawing?

Only with your approval, and only after review. Send the TE part number and the mating part. We check whether a manufacturer lists a comparable part, for example Amphenol lists ATM04-2P as comparable to DEUTSCH DTM04-2P, and give you the options with their sources. Whether a given connector brand can be used for your build is confirmed per enquiry.

Is a manufacturer-listed "comparable" part a guaranteed drop-in replacement?

No. A manufacturer cross-reference tells you where to start. The housing, terminal, seal, wedge and crimp tooling still have to be checked against your drawing, and the sample has to pass your criteria against the real mating part or a controlled fixture approved by the design owner. We mark every row in our comparable-parts table as a candidate until it is qualified.

Do you sell loose connectors?

No. We are not a connector distributor. Connectors are sourced for your build and fitted into tested cable assemblies and wire harnesses to your drawing; Molex parts, for example, are bought from authorised distributors.

What if I do not want a substitute connector at all?

Then no alternative is proposed. List the manufacturer part numbers in your BOM; JST connectors are built on request, and other connector brands are confirmed per enquiry against availability. A substitute is only used if you approve it in writing. For wire, the brand and type on your drawing are followed strictly.

Is there a minimum order quantity for a harness with alternate connectors?

There is no MOQ for prototypes or production. Connector and wire minimum buys can still affect quantity and price, and this is confirmed in your quote.

How long does the review and sample take?

These are separate steps. First reply is within 12 hours and a quotation is normally sent within 24 hours of a complete RFQ. The time needed to review an alternate, and the sample and production lead times, depend on the parts and complexity and are confirmed in your quote.

Sources

  • Amphenol Sine Systems, "AT Series AT vs DT" brochure, updated 08-2025 (amphenol-sine.com)
  • Amphenol Sine Systems product pages: "ATM04-2P 2-Way Receptacle, Male. Comparable to PN# DTM04-2P"; "ATP04-2P 2-Way Receptacle, Male. Comparable to PN# DTP04-2P"; "AHD10-6-12P-L 6 Position Receptacle, Male, Flange, Threaded Rear. Comparable to PN# HD10-6-12P", checked 19 November 2026
  • TE Connectivity product page for 280513 (AMPMODU IV/V), checked 9 November 2026 (te.com)
  • Molex product family pages for PicoBlade, KK 254 and Micro-Fit 3.0, checked 9 November 2026 (molex.com)
  • JST product pages for GH, XH and VH series, checked 9 November 2026 (jst-mfg.com)
  • IPC/WHMA-A-620, Requirements and Acceptance for Cable and Wire Harness Assemblies (IPC)

Request a Free Quote

Send your drawing, wire list or BOM for an engineering review.

First reply within 12 hours, quotation within 24 hours; quotes are valid for 30 days.

NDA confidentiality · Built to IPC/WHMA-A-620 · Hebei Cloom: ISO 9001